top of page
< Back
AREA(S) TO BE CLEANED

Weighing Scales

CLEANING SCHEDULE

Cleaning Frequency

  • Weekly

  • Earlier if visibly soiled

 

RESPONSIBILITY PERSON / TEAM

Responsible Officer / Team

Food Production Operative


Ensure all products are used as per manufactures guidnance and safety sheets.

 

EQUIPMENT & CAUTIONS

Always follow manufacturers guidance

Check all product labels and safety data sheets for additional information (mandatory prior to usage)

Protective & Cleaning Equipment

Always refer to Safety Data Sheets & Manufacturers Instructions


Protective Equipment Required

  • Chemical resistant gloves

  • Damp cloth

  • Wipes

  • Apron



Cautions & Hazards

  • Follow manufactures guidance and safety sheet information at all times.

  • Only use agents you have been trained to used.

 

  • Take care to use chemicals correctly, avoid spillage

  • Ensure no food production activity in vicinity to prevent cross contamination.

 

CHEMICALS REQUIRED

  • Cleaning chemicals shall be fit for purpose, suitably labelled, secured in closed containers and used in accordance with manufacturers’ instructions.


  • Ensure dilution strengths (as per product label) and contact times (as per product label) are adhered to.


  • Always follow manufacturers guidance.


  • Ensure disinfectants used comply with BS EN 1276 or BS EN 13697 standards


  • Check all product labels and safety data sheets for additional information (mandatory prior to usage)

Product

Directions for Use & Dilution

Safety Data Sheet (Review Prior to Usage)

Jantex Green Surface Sanitiser Wipes Starter Tub 200mm (Pack of 400)



 


Directions for use & Dilution


 


Ensure dilution strengths and contact


 








 

CLEANING METHOD

Always follow manufacturers guidance

Check all product labels and safety data sheets for additional information (mandatory prior to usage)

Cleaning Method

  1. Wash the tip of the thermometer with cold water. 

  2. Wipe down the thermometer with antibacterial wipes

  3. Include all surfaces including the tip, wiring, main box of the thermometer

  4. Note – avoid water getting into the digital screen as this can cause water damage to the device

  5. Rinse the thermometer to remove the residual chemical

  6. Wipe with a dry cloth. Ensure that the thermometer is completely dry before replacing it to its original location



 
CLEANING VALIDATION

Cleaning Validation & Inspection


Cleaned surface shall be visibly clear from all debris, soiling, food, residue and dirt.

Visual Inspection

Rapid Hygiene Swab Reports


Cleaning Analyses and Validation Reports including assessment for micobiology and allergens.


 
SIGN OFF PROCEDURE

Sign Off Procedure

Cleaning Record sheet to record cleaning work has been completed to the correct standard by a supervisor who is not the person carrying out the cleaning.

 

Notes




 

bottom of page